TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 885 of 933

TM 9-2520-270-34

28. REMOVE SLING (1) FROM LIFTING

DEVICE (2) AND FOUR CORNERS (3)

OF CONTAINER FRAME (4).

NOTE

Screws securing front transmission container

mount to container frame are torqued only

after transmission is installed in lower container.

30. INSTALL FRONT TRANSMISSION

CONTAINER MOUNT (6) ON FRAME (4).

a.

b.

c.

4-544

Position front container mount (6)

on pin (7).

Install four washers (8), lock

washers (9), and screws (10) on front

container mount (6).

Hand tighten screws (10).

Change 2

29. USING 1/2-lNCH DRIVE TORQUE

WRENCH, 3/4-lNCH TORQUE WRENCH

ADAPTER, AND 10-INCH EXTENSION

(FOR BOTTOM NUTS), TORQUE

16 SELF-LOCKING NUTS (5) TO

60-66 ft-lbs (8-9 mkg).