TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 878 of 933

TM 9-2520-270-34

4. REMOVE REAR CONTAINER

MOUNT (1) FROM TRANSMISSION

CONTAINER FRAME (2).

a. Remove four screws (3), lock

washers (4), and flat washers (5)

from mount (1). Put in shipping bag

b. Remove mount (1) from frame (2).

a.

b.

c.

(H) Using lifting device (11), lower

sling (10) to reach container frame (2).

Attach each leg of sling (10) to a

corner (12) of container frame (2).

(H) Adjust length of turnbuckle

legs (13), if necessary.

5. REMOVE FRONT CONTAINER

MOUNT (6) FROM CONTAINER

FRAME (2).

a. Remove four screws (7), lock

washers (8) and flat washers (9)

from mount (6). Put in shipping bag.

b. Remove mount (6) from frame (2).

NOTE

Lifting device and sling keep the container

frame suspended when parts are removed.

6. REPAIRER AND HELPER ATTACH

SLING (10) TO CONTAINER

FRAME (2).

GO TO NEXT PAGE

4-537