TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 872 of 933

TM 9-2520-270-34

11. REPAIRER AND HELPER REMOVE

COLLAR (1) FROM UPPER

CONTAINER (2)

a.

b.

c.

(H) Using spanner wrench, hold

nut (3) on inside of upper

container (2).

Using second spanner wrench,

remove access cover collar (1),

nut (3), and washer (4) from dessicant

port (5) on upper container (2).

Remove preformed packing (6) from

collar (1). Discard packing.

12. INSPECT INSTALLATION IDENTI-

13.

FICATION MARKER (7) ON UPPER

CONTAINER (2) FOR DAMAGE.

a. If identification marker (7) is

damaged or cannot be read, go to

step 13. If not, go to step 14.

REMOVE IDENTIFICATION MARKER (7)

FROM UPPER CONTAINER (2).

14. INSPECT IDENTIFICATION PLATE (8)

ON UPPER CONTAINER (2) FOR

DAMAGE OR LOOSENESS.

a. If plate (8) is loose or damaged, go

to step 15. If not, go to step 16.

15. REMOVE PLATE (8) FROM UPPER

CONTAINER (2).

a. Using electric drill and drill set,

remove four drive screws (9) and

plate (8) from upper container (2).

Discard screws.

GO TO NEXT PAGE

4-531