TM 9-2520-272-40
0048
NOTE
If left cover has not been removed, go to Step 4. If left cover has been removed, go to Step 5.
4. Use puller to remove left output shaft (Figure 2, Item 2). Go to Step 9.
5. Turn transmission front up.
6. Insert drift pin (Figure 2, Item 5) through output shaft hole in left side of transmission and through output pump
drive gear (Figure 2, Item 4) to bottom of left output shaft (Figure 2, Item 2) in right side of transmission.
7. Use a hammer to tap drift pin (Figure 2, Item 5) to remove left output shaft (Figure 2, Item 2) from transmission.
8. Turn transmission right end up.
9. Remove output pump drive gear (Figure 3, Item 4) from right side of transmission.