TM-9-2520-272-40
CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A
TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL
FEBRUARY 2012
TM-9-2520-272-40 - Page 391 of 620
TM 9-2520-272-40
0047
SUSTAINMENT MAINTENANCE
REPLACE INNER BRAKE ADJUSTING LINK PIN
INITIAL SETUP:
Tools and Special Tools
Tool Kit, General Mechanic’s (GMTK) (WP 0079,
Item 45)
Materials/Parts
Pin, Spring (WP 0080, Item 6)
Personnel Required
Track Vehicle Repairer, 91H10
Equipment Condition
Inner brake adjusting link assembly removed
(WP 0025)
REPLACE INNER BRAKE ADJUSTING LINK PIN
Remove Pin
1. Put inner brake adjusting link (Figure 1, Item 1) in vise.
2. Remove pin (Figure 1, Item 2) from link (Figure 1, Item 1). Discard pin (Figure 1, Item 2).
Install Pin
1. Install new pin (Figure 1, Item 2) to a height of 0.118 to 0.138 in. (3.00 to 3.50 mm) above surface of link
(Figure 1, Item 1).
2. Remove link (Figure 1, Item 1) from vise.
Back to Top
