TM-9-2520-272-40

CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A

TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL

FEBRUARY 2012
TM-9-2520-272-40

  TM-9-2520-272-40 - Page 382 of 620

TM 9-2520-272-40
0045
55.Install support (Figure 23, Item 3) into center housing (Figure 23, Item 51), aligning cam shaft (Figure 23, Item
13) with bearing (Figure 23, Item 52) in center housing. Install support (Figure 23, Item 3).
56.Install 15 washers (Figure 23, Item 2) and 15 bolts (Figure 23, Item 1) that retain support (Figure 23, Item 3).
57.Use adjustable wrench to turn cam shaft (Figure 23, Item 13) a small distance to install shaft (Figure 23,
Item 13) in bearing (Figure 23, Item 52).
58.Torque 15 bolts (Figure 23, Item 1) to 54 to 65 lb-ft (74 to 88 N·m).


Back to Top