TM-9-2520-272-40

CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A

TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL

FEBRUARY 2012

TM-9-2520-272-40 - Page 396 of 620

TM 9-2520-272-40

0048

INSTALL OUTPUT PUMP DRIVE GEAR, LEFT OUTPUT SHAFT,

LEFT STEER AND OUTPUT SUN GEAR, AND LEFT STEER GEAR

NOTE

Transmission is on maintenance stand, left end up.

1. Apply petrolatum to output pump drive gear (Figure 4, Item 4). Install output pump drive gear (Figure 4, Item 4)

onto left output shaft (Figure 4, Item 2).

2. Install left output shaft (Figure 4, Item 2), with gear (Figure 4, Item 4) in position, into center housing.

3. Install left steer gear (Figure 5, Item 3).

4. Install left steer and output sun gear (Figure 5, Item 1).