TM-9-2520-272-40

CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A

TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL

FEBRUARY 2012

TM-9-2520-272-40 - Page 402 of 620

TM 9-2520-272-40

0049

NOTE

Outer race for lower bearing stays in bearing retaining plate and outer race for upper bearing

stays in center housing when hydrostatic pump idler gear is removed. Each of these bearings

can be disassembled into two pieces and is a matched set with an outer race and an inner race

and rollers. DO NOT REPLACE these inner races and rollers unless you also replace the outer

races of the related bearing. Refer to WP 0043 for removal of the outer race of bearing.

4. Remove inner race and rollers of bearings (Figure 4, Item 9) and (Figure 4, Item 7) from hydrostatic pump idler

gear (Figure 4, Item 8).

WARNING