TM-9-2520-272-40
CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A
TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL
FEBRUARY 2012
TM-9-2520-272-40 - Page 556 of 620
TM 9-2520-272-40
0069
6. Install 3/8 inch washer (Figure 18, Item 14) and (Figure 19, Item 14) under head of 3/8-16 x 1-3/4 inch bolt
(Figure 18, Item 13) and (Figure 19, Item 13). Put bolt through lug of multiple-leg sling (Figure 18, Item 12)
and install another 3/8 inch washer (Figure 18, Item 14) and (Figure 19, Item 14) on bolt (Figure 18, Item
13) and (Figure 19, Item 13).
7. Install bolt (Figure 18, Item 13) attaching the multiple-leg sling (Figure 18, Item 12) to input housing (Figure 18,
Item 5). Tighten bolt to snug.
8. Install 3/8 inch washer (Figure 18, Item 14) and (Figure 19, Item 14) under head of 3/8-16 x 1-3/4 inch bolt
(Figure 18, Item 13) and (Figure 19, Item 13). Put bolt through lug (Figure 18, Item 19) and (Figure 19, Item 19)
of multiple-leg sling (Figure 18, Item 12) and install another 3/8 inch washer (Figure 18, Item 14) and (Figure
19, Item 14) on bolt (Figure 18, Item 13) and (Figure 19, Item 13).
9. Install bolt (Figure 19, Item 13) attaching multiple-leg sling (Figure 18, Item 12) to left cover assembly (Figure
19, Item 4). Tighten bolt to snug.
Back to Top
