TM-9-2520-272-40

CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A

TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL

FEBRUARY 2012

TM-9-2520-272-40 - Page 570 of 620

TM 9-2520-272-40

0070

2. Strip 1/4 in. (6 mm) of insulation from end of lead (Figure 5, Item 10).

3. Put new terminal (Figure 5, Item 8) and (Figure 5, Item 11) on stripped end of lead (Figure 5, Item 10) and

(Figure 6, Item 10). Bend tabs (Figure 6, Item 14) of terminal (Figure 5, Item 8) and (Figure 5, Item 11) around

insulation and bend tabs (Figure 6, Item 15) around wire of lead (Figure 6, Item 10). Bend tangs (Figure 6, Item

16) slightly away from terminal (Figure 5, Item 9).

END OF TASK

INSTALL TERMINAL

1. Line up slot (Figure 5, Item 12) on terminal (Figure 5, Item 8) with key (Figure 5, Item 13) in new insulator

(Figure 5, Item 8). Push insulator (Figure 5, Item 8) onto terminal (Figure 5, Item 9) until tangs lock into place.