TM-9-2520-272-40

TM-9-2520-272-40 - Page 572 of 620

TM 9-2520-272-40

0070

INSTALL SOLENOIDS

1. For any solenoids (Figure 7, Item 1) being replaced, be sure there is a preformed packing (Figure 7, Item 14) in

place on the underside of each new solenoid (Figure 7, Item 1).

2. Install new solenoids (Figure 7, Item 1) in positions shown on main control valve body assembly (Figure 7, Item

5) and on lockup valve body assembly (Figure 7, Item 7).

3. For solenoid A (Figure 7, Item 2), install spring retainer (Figure 7, Item 4) in position shown to cover exhaust port.

4. Install two bolts (Figure 7, Item 6) into each of four solenoids (Figure 7, Item 1) on main valve body assembly

(Figure 7, Item 5), or install one bolt (Figure 7, Item 3) and one bolt (Figure 7, Item 4) into solenoid A (Figure 7,

Item 2) on the main valve body assembly (Figure 7, Item 5).

5. Install two bolts (Figure 7, Item 6) into each of two solenoids (Figure 7, Item 1) on lockup valve body assembly

(Figure 7, Item 7).

6. Torque all replaced bolts (Figure 7, Item 3) and (Figure 7, Item 4) to 108 to 132 lb-in. (12 to 15 N·m).