TM-9-2520-272-40

CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A

TECHNICAL MANUAL; SUSTAINMENT MAINTENANCE MANUAL

FEBRUARY 2012

TM-9-2520-272-40 - Page 574 of 620

TM 9-2520-272-40

0071

REPLACE PACKING ASSEMBLY

NOTE

Shipping plug may or may not be installed, dependent upon origin of transmission. This

opening is used for the throttle modulator, a vehicle part which is installed when the vehicle

power pack is installed.

1. Remove bolt (Figure 1, Item 3) and bracket (Figure 1, Item 4). If present, remove metal shipping plug (Figure

1, Item 2).

2. Drive packing assembly (seal) (Figure 1, Item 1) from inside of top cover. Discard packing assembly (seal)

(Figure 1, Item 1).

3. Using a 1/2 inch drive, 13/16 inch socket as a driver, drive against the identif cation numbers on new seal

(Figure 1, Item 1).

4. Install new seal (Figure 1, Item 1) to a f rm seat against the shoulder in the bore.

5. Install shipping plug if present.

6. Install bolt (Figure 1, Item 3) and bracket (Figure 1, Item 4) over shipping plug (Figure 1, Item 2), if shipping

plug is present.

7. Torque bolt (Figure 1, Item 3) to 156 to 180 lb-in. (18 to 20 N·m).