TM 9-2540-207-14&P
5-78
Diagnostic Display (continued)
2.
Install Connector (J8) from the Wiring Harness to the Diagnostic Display Board.
3.
Apply Loctite 243 (blue) to each of the four (4) screws.
4.
Install one (1) star washer and one (1) screw on each post and tighten with a #2 cross-
tip screwdriver.
DO NOT OVER TIGHTEN.
5.
Install Top Cover (ref. 5.4.1).
Figure 5-12. Diagnostic Display Board Details
Connector
Connector