TM-9-2815-205-24

6V53/6V53T ENGINES, DIESEL WITH CONTAINERS; MODEL 5063-5299, MODEL 5063-5392, MODEL 5063-5393 AND MODEL 5063-539L

TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE

FEBRUARY 2013

TM-9-2815-205-24 - Page 157 of 856

TEST AND INSPECTION - Continued

41

45

42

43

19, 33

44

MAINT_059

Figure 4.

Engine/Transmission Oil Cooler Test and Inspection.

3.

Submerge oil cooler assembly in a container of water heated to 180°F (82°C). Air bubbles in water indicate

leaks. Replace oil cooler if leaks appear.

4.

Release air pressure on cooler assembly. Remove blocking plate, rubber gasket, and hose from oil cooler.

WARNING

Compressed air used for cleaning purposes will not exceed 30 PSI (207 kPa). Use only

with protective equipment (goggles, face shield, gloves, etc.). Failure to comply may result

in injury to personnel.

5.

Dry oil cooler with compressed air.

END OF TASK

TM 9-2815-205-24

0021

0021-7