TM-9-2815-205-24

6V53/6V53T ENGINES, DIESEL WITH CONTAINERS; MODEL 5063-5299, MODEL 5063-5392, MODEL 5063-5393 AND MODEL 5063-539L

TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE

FEBRUARY 2013

TM-9-2815-205-24 - Page 201 of 856

CLEANING

WARNING

Cleaning solvent is TOXIC and flammable. Wear protective goggles and gloves; use only

in a well-ventilated area; avoid contact with skin, eyes, and clothes; and do not breathe

vapors. Keep away from heat or flame. Never smoke when using cleaning solvent. Failure

to comply may result in injury, illness, or death to personnel.

1.

Clean drain receptacle, bracket, and filter element with dry cleaning solvent and dry with compressed air.

2.

Remove obstructions in hose using compressed air.

END OF TASK

INSPECTION-ACCEPTANCE AND REJECTION CRITERIA

Check drain receptacle, retainer, and bracket for cracks or broken parts.

END OF TASK

ASSEMBLY

1.

If removed, install two loop clamps (Figure 1, Item 3) and hose clamp (Figure 1, Item 1) on hose

(Figure 1, Item 2).

2.

Install machine screw (Figure 1, Item 4), lower loop clamp (Figure 1, Item 3), and nut (Figure 1, Item 8) on

bracket (Figure 1, Item 9).

3.

Install drain receptacle (Figure 1, Item 6), filter element (Figure 1, Item 5), retainer (Figure 1, Item 7), two flat

washers (Figure 1, Item 10), and two wing nuts (Figure 1, Item 11) on bracket (Figure 1, Item 9).

END OF TASK

END OF WORK PACKAGE

TM 9-2815-205-24

0029

0029-3/blank