TM-9-2815-205-24

6V53/6V53T ENGINES, DIESEL WITH CONTAINERS; MODEL 5063-5299, MODEL 5063-5392, MODEL 5063-5393 AND MODEL 5063-539L

TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE

FEBRUARY 2013

TM-9-2815-205-24 - Page 205 of 856

CLEANING

WARNING

Cleaning solvent is TOXIC and flammable. Wear protective goggles and gloves; use only

in a well-ventilated area; avoid contact with skin, eyes, and clothes; and do not breathe

vapors. Keep away from heat or flame. Never smoke when using cleaning solvent. Failure

to comply may result in injury, illness, or death to personnel.

Clean parts with dry cleaning solvent and dry with compressed air.

END OF TASK

INSPECTION-ACCEPTANCE AND REJECTION CRITERIA

Inspect all parts for damage and excessive wear. Replace as necessary.

END OF TASK

ASSEMBLY

1.

For model 5063-5392: If removed, install two elbows (Figure 1, Item 2) and two plugs (Figure 1, Item 3) in

filter head (Figure 1, Item 1).

2.

Insert shoulder bolt (Figure 1, Item 11) into new gasket set (Figure 1, Item 12) and cover (Figure 1, Item 14).

Slide spring (Figure 1, Item 10), spacer (Figure 1, Item 9), o-ring (Figure 1, Item 8), and retainer

(Figure 1, Item 7) onto shoulder bolt and install nut (Figure 1, Item 4).

3.

Slide new oil filter element (Figure 1, Item 6) over shoulder bolt (Figure 1, Item 11) in cover

(Figure 1, Item 14). Install new gasket (Figure 1, Item 5) in filter head (Figure 1, Item 1).

4.

Install cover (Figure 1, Item 14) and shoulder bolt (Figure 1, Item 11) on filter head (Figure 1, Item 1).

Torque bolt to 50–60 lb-ft (68–81 N·m).

5.

Install drain plug (Figure 1, Item 13) in bottom of oil filter cover (Figure 1, Item 14).

END OF TASK

END OF WORK PACKAGE

TM 9-2815-205-24

0030

0030-3/blank