TM-9-2815-205-24

6V53/6V53T ENGINES, DIESEL WITH CONTAINERS; MODEL 5063-5299, MODEL 5063-5392, MODEL 5063-5393 AND MODEL 5063-539L

TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE

FEBRUARY 2013

TM-9-2815-205-24 - Page 212 of 856

REMOVAL

1.

Attach beam-type sling (Figure 1, Item 1) to lifting brackets (Figure 1, Item 2) and support engine with

lifting device.

2.

Remove two screws (Figure 1, Item 12), two flat washers (Figure 1, Item 11), and retaining strap

(Figure 1, Item 10) from front support (Figure 1, Item 9).

3.

Remove four screws (Figure 1, Item 3), four flat washers (Figure 1, Item 6), and four nuts (Figure 1, Item 7)

fastening rear engine support (Figure 1, Item 4) to container support (Figure 1, Item 5).

WARNING

Never crawl under equipment when performing maintenance unless equipment is securely

blocked. Keep clear of equipment when it is being raised or lowered. Do not allow heavy

components to swing while suspended by lifting device. Exercise caution when working

near a cable or a chain under tension as equipment may drop or shift. Failure to comply

may result in injury to personnel.

4.

Remove engine from lower half of container (Figure 1, Item 8).

6

7

12

3

1

4

11

10

8

9

5

2

MAINT_084

Figure 1.

Engine Removal from Container.

TM 9-2815-205-24

0032

0032-2