TM-9-2815-205-24

6V53/6V53T ENGINES, DIESEL WITH CONTAINERS; MODEL 5063-5299, MODEL 5063-5392, MODEL 5063-5393 AND MODEL 5063-539L

TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE

FEBRUARY 2013

TM-9-2815-205-24 - Page 210 of 856

ASSEMBLY - Continued

NOTE

A cast letter “S" (secondary) is on top of filter head.

2.

Fuel secondary filter assembly (filter).

a.

Install spring (Figure 1, Item 10), spring seat (Figure 1, Item 9), new gasket (Figure 1, Item 8), seat

(Figure 1, Item 7), and new retaining ring (Figure 1, Item 6) in filter body (Figure 1, Item 11).

b.

Place new filter element (Figure 1, Item 5) over center stud in filter body (Figure 1, Item 11) and push

against seat (Figure 1, Item 7).

c.

Place new large gasket (Figure 1, Item 4) in recess of filter head (Figure 1, Item 3).

d.

Place new filter element (Figure 1, Item 5) and filter body (Figure 1, Item 11) under filter head

(Figure 1, Item 3) and install small new gasket (Figure 1, Item 2) and bolt (Figure 1, Item 1). Tighten

bolt just enough to prevent fuel leakage.

e.

Install drain cock (Figure 1, Item 12) in filter body (Figure 1, Item 11).

END OF TASK

END OF WORK PACKAGE

TM 9-2815-205-24

0031

0031-4