TM-9-2815-205-24

6V53/6V53T ENGINES, DIESEL WITH CONTAINERS; MODEL 5063-5299, MODEL 5063-5392, MODEL 5063-5393 AND MODEL 5063-539L

TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE

FEBRUARY 2013

TM-9-2815-205-24 - Page 278 of 856

REMOVAL - Continued

11.

Disconnect hose assembly (Figure 3, Item 35) from elbow (Figure 3, Item 42) in solenoid valve

(Figure 3, Item 19). Remove hose assembly from engine. If necessary, remove loop clamp

(Figure 3, Item 36) from hose assembly.

12.

Remove tube assembly (Figure 3, Item 31) from elbow (Figure 3, Item 32), in solenoid valve

(Figure 3, Item 19), and elbow (Figure 3, Item 33) in air box heater (Figure 3, Item 21).

NOTE

For access to screws, loosen nut on top of solenoid and rotate coil housing.

13.

Remove two screws (Figure 3, Item 41), two lockwashers (Figure 3, Item 40), two flat washers

(Figure 3, Item 39), and solenoid bracket (Figure 3, Item 34) from front cover (Figure 3, Item 7).

Discard lockwashers.

14.

Remove two machine screws (Figure 3, Item 38), two lockwashers (Figure 3, Item 37), and solenoid valve

(Figure 3, Item 19) from solenoid bracket (Figure 3, Item 34). Discard lockwashers.

15.

If necessary, remove elbow (Figure 3, Item 42), elbow (Figure 3, Item 32), and adapter (Figure 3, Item 43)

from solenoid valve (Figure 3, Item 19).

7

21

31

32

33

34

35

36

38

39

40

41

35

43

42

37

19

MAINT_123

Figure 3.

Air Box Heater Solenoid and Mounting Bracket Removal.

TM 9-2815-205-24

0044

0044-4