TM-9-2815-205-24
6V53/6V53T ENGINES, DIESEL WITH CONTAINERS; MODEL 5063-5299, MODEL 5063-5392, MODEL 5063-5393 AND MODEL 5063-539L
TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE
FEBRUARY 2013
TM-9-2815-205-24 - Page 524 of 856
ITEM 15 - TEST LEAD
Notes:
1.
Cut a piece of 12-gage wire 6 inches long.
2.
Cut a piece of 12-gage wire 12 inches long.
3.
Attach a test clip to one end of 6 and 12 inch long 12-gage wire.
4.
Drill a hole through end of two No. 2K plugs in order to insert 12-gage wire through.
5.
Drill a hole through end of two No. 2K plugs in order to insert 12-gage wire through.
6.
Insert one lead through hole in plug and connect to 1-ohm, 50-watt resistor. Insert in rubber hose and attach
other lead to resistor.
Bulk Material
Insulated wire, 12-gage (18 in.)
NO/ 2K
PLUG
1 in. HOSE,
7 in. LONG
1 OHM, 50 WATT
RESISTOR
NO/ 2K
PLUG
12 GAGE WIRE,
30 in. LONG
12 GAGE WIRE,
6 in. LONG
TEST CLIP
TEST CLIP
MAINT_243
Figure 15.
Item 15 - Test Lead (12384626).
TM 9-2815-205-24
0081
0081-18
Back to Top
