TM-9-2815-205-24

6V53/6V53T ENGINES, DIESEL WITH CONTAINERS; MODEL 5063-5299, MODEL 5063-5392, MODEL 5063-5393 AND MODEL 5063-539L

TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE

FEBRUARY 2013

TM-9-2815-205-24 - Page 532 of 856

DISASSEMBLY

NOTE

Cover each injector fuel port to keep out dirt immediately after removing fuel tube

assemblies (Figure 1, Item 8).

1.

Remove six fuel tube assemblies (Figure 1, Item 8) from fuel injectors (Figure 1, Item 7) and fuel nipples

(Figure 1, Item 9). Discard tube assemblies.

NOTE

Tag rocker arms, shafts, brackets, valves, cam followers, and associated hardware for

installation in original location.

2.

Remove six bolts (Figure 1, Item 2) fastening rocker arm shafts (Figure 1, Item 5) and brackets

(Figure 1, Item 4) to cylinder head. On models 5063-5392, 5063-5393, and 5063-539L, remove hold-down

bracket (Figure 1, Item 1) and hold-down bracket (Figure 1, Item 3) from intermediate brackets.

NOTE

On all except model 5063-5299, one bracket (Figure 1, Item 4) on right cylinder head is

also the throttle delay housing (Figure 1, Item 6).

3.

Remove three rocker arm shafts (Figure 1, Item 5) and six brackets (Figure 1, Item 4) from cylinder head.

8

7

9

2

4

1

3

6

5

MAINT_246

Figure 1.

Cylinder Head Disassembly.

TM 9-2815-205-24

0083

0083-2