CLEANING
WARNING
Cleaning solvent is TOXIC and flammable. Wear protective goggles and gloves;
use only in a well-ventilated area; avoid contact with skin, eyes, and clothes; and
do not breathe vapors. Keep away from heat or flame. Never smoke when using
cleaning solvent. Failure to comply may result in injury, illness, or death to
personnel.
Compressed air used for cleaning purposes will not exceed 30 PSI (207 kPa). Use
only with protective equipment (goggles, face shield, gloves, etc.). Failure to
comply may result in injury to personnel.
1.
Clean cylinder head and cylinder head components with cleaning solvent and dry with compressed air
(WP 0009).
2.
Clean galleries in cylinder head using probes and brushes.
3.
If water passages are heavily coated with scale, remove injector tubes and water nozzles and thoroughly
clean water jacket areas.
END OF TASK
TM 9-2815-205-24
0083
0083-9