TM-9-2815-205-24

6V53/6V53T ENGINES, DIESEL WITH CONTAINERS; MODEL 5063-5299, MODEL 5063-5392, MODEL 5063-5393 AND MODEL 5063-539L

TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE

FEBRUARY 2013
TM-9-2815-205-24

  TM-9-2815-205-24 - Page 92 of 856

REPAIR OR REPLACEMENT
a.
Clean repaired parts thoroughly before assembly or installation.
b.
Align bushings or bushing type bearings in casting or retaining cage.
c.
Press into place with arbor press or with the special tools provided.
d.
Bushing type bearings are machined for proper clearance and need no reaming.
Oil Seals
1.
Oil seals must be replaced during component repair.
2.
Removal:
Press or pry damaged oil seal from casting or adapter. Use care not to damage bore in casting or
adapter.
3.
Repair:
a.
When oil seal bore in casting or adapter is burred or damaged to a point where an oil tight seal is
impossible, replace casting or adapter.
b.
Remove slight nicks, burrs, and scratches from bore in casting or adapter with crocus cloth dipped in
cleaning solvent.
4.
Installation:
Install new oil seal in bore of casting or adapter using proper oil seal installer tool.
END OF TASK
DISASSEMBLY
Scope
Exercise care in all component assembly operations to ensure satisfactory engine performance.
Precautionary rules for assembly are outlined below.
Precautionary Rules
1.
Cleanliness is essential in all component assembly operations.
2.
Dirt and dust, even in minute quantities, are abrasive.
3.
Parts must be cleaned as specified and kept clean.
4.
Wrap or cover parts and components when assembly procedures are not immediately completed.
5.
Coat all bearings and all contact surfaces with engine oil OE/HDO-15/40 to ensure lubrication of parts
during initial engine starting.
6.
Replace all gaskets and preformed packings removed in disassembly. Clean and remove all traces of
gasket material from surfaces.
7.
Store all fastening hardware (nuts, bolts, screws, lockwashers, and flat washers) in or with the related
component to assist in reassembly.
END OF TASK
END OF WORK PACKAGE
TM 9-2815-205-24
0009
0009-6


Back to Top