TM-9-2815-205-24
6V53/6V53T ENGINES, DIESEL WITH CONTAINERS; MODEL 5063-5299, MODEL 5063-5392, MODEL 5063-5393 AND MODEL 5063-539L
TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE
FEBRUARY 2013
TM-9-2815-205-24 - Page 100 of 856
REMOVAL
NOTE
Ensure transmission oil cooler is drained.
1.
Loosen two hose clamps (Figure 1, Item 2) and hose (Figure 1, Item 3) between transmission oil cooler
assembly (Figure 1, Item 4) and water outlet housing (Figure 1, Item 1).
2.
Remove screw (Figure 1, Item 8), flat washer (Figure 1, Item 11), lockwasher (Figure 1, Item 12), and nut
(Figure 1, Item 13) from clamp (Figure 1, Item 10) and bracket (Figure 1, Item 9) on tube (Figure 1, Item 7).
Discard lockwasher.
3.
Remove bolt (Figure 1, Item 15), bracket (Figure 1, Item 9), flat washer (Figure 1, Item 17), lockwasher
(Figure 1, Item 18), and nut (Figure 1, Item 19) from fan support bracket (Figure 1, Item 16). Discard
lockwasher.
4.
Loosen four hose clamps (Figure 1, Item 5) on two hoses (Figure 1, Item 6) on tube (Figure 1, Item 7)
between water pump (Figure 1, Item 14) and transmission cooler top (Figure 1, Item 4). Slide clamps and
hoses onto tube and remove tube. Remove hoses and clamps from tube.
1
2
2
3
4
5
6
5
7
9
10
11
8
12
13
14
15
16
19
17
18
5
5
6
MAINT_018
Figure 1.
Transmission Oil Cooler Mounting Hardware Removal.
5.
Remove eight screws (Figure 2, Item 27), eight lockwashers (Figure 2, Item 26), and eight flat washers
(Figure 2, Item 25) from bottom of transmission oil cooler bracket (Figure 2, Item 24). Discard lockwashers.
TM 9-2815-205-24
0011
0011-2
Back to Top
