TM-9-2815-205-24
6V53/6V53T ENGINES, DIESEL WITH CONTAINERS; MODEL 5063-5299, MODEL 5063-5392, MODEL 5063-5393 AND MODEL 5063-539L
TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE
FEBRUARY 2013
TM-9-2815-205-24 - Page 96 of 856
REMOVAL - Continued
4.
Open access cover (Figure 2, Item 10) in upper container half (Figure 2, Item 3) and remove desiccant bags
from access port (Figure 2, Item 8). Discard desiccant.
3
10
8
9
MAINT_016
Figure 2.
Container and Nonmetallic Seal.
END OF TASK
INSTALLATION
NOTE
Container (NSN 8145-00-138-7809) for model 5063-5299 requires 62 units of
Class 1 desiccant.
Container (NSN 2815-01-232-9447) requires 128 units of Class 1 desiccant.
1.
Install Class 1 desiccant through access port (Figure 2, Item 8) in upper container half (Figure 2, Item 3) and
screw access cover (Figure 2, Item 10) onto port.
WARNING
Never crawl under equipment when performing maintenance unless equipment is securely
blocked. Keep clear of equipment when it is being raised or lowered. Do not allow heavy
components to swing while suspended by lifting device. Exercise caution when working
near a cable or a chain under tension as equipment may drop or shift. Failure to comply
may result in injury to personnel.
2.
Inspect container nonmetallic seal (Figure 2, Item 9) for cuts, cracks, or other damage. Discard nonmetallic
seal if unserviceable and install a new nonmetallic seal.
TM 9-2815-205-24
0010
0010-4
Back to Top
