TM-9-2815-205-34

ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

AUGUST 1992

TM-9-2815-205-34 - Page 514 of 596

TM 9-2815-205-34

4-6. FUEL FLOW TEST

This task covers: Testing

INITIAL SETUP

MODELS

EQUIPMENT CONDITION

All Para Description

4-2 Prepare engine for start-up

TOOLS AND SPECIAL TOOLS

Tool kit, general mechanics (App B, Item 107 )

Testing

a.

b.

c.

d.

NOTE

•

If necessary, adapt a fuel line to the fuel return to reach container.

●

On model 5063-5393 the fuel return fitting is machined into a fuel junction block which

is mounted on the engine oil cooler.

Connect a fuel return line (1) to the fuel return fitting (2) on engine.

Hold open end of fuel return line (1) in a measured container.

●

Avoid contact with hot manifolds, pulleys, and other moving parts to avoid

personal injury.

. Wear proper ear protection when running engine. Noise volume of engine can

cause hearing loss or injury.

Start engine and run at 2200 RPM NO-LOAD. Using a stop watch, measure fuel flow from fuel

return line (1) for one minute. Minimum fuel return rate is 2/3 GPM.

Stop engine and remove fuel line (1). Connect fuel return.

4-30