TM-9-2815-205-34

ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

AUGUST 1992

TM-9-2815-205-34 - Page 517 of 596

TM 9-2815-205-34

c.

d.

e.

f.

Start engine and operate at 2500 RPM. Note

reading on fuel pressure gage (4). Fuel

pressure must be 45-70 PSI (310-483 kPa) at

2500 RPM.

Stop engine by moving governor stop lever (5)

to NO FUEL position.

Remove fuel pressure gage (4) from

connection at injector (2) and fuel inlet

manifold (3).

CAUTION

Do not bend fuel tube assemblies and do not exceed specified torque on fuel tube nuts.

Excessive tightening will twist or fracture flared end of fuel tube and result in leaks.

Install fuel inlet tube assembly (1) on injector (2) and fuel inlet manifold (3). Using fuel nut wrench,

torque fuel tube nuts to 130-160 lb-in (14.7-18.1 NŽm).

END OF TASK

FOLLOW-ON MAINTENANCE

Para Description

3-20 Install rocker arm covers (models 5063-5299 and 5063-5398).

3-21 Install rocker arm covers models 5063-5392,5063-5393, 5063-539F and 5063-539L)

3-22 Install rocker arm covers (model 5063-5395).

Change

1

4-33