TM-9-2815-205-34

ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

AUGUST 1992

TM-9-2815-205-34 - Page 513 of 596

TM 9-2815-205-34

y. Install two rocker arm shaft bolts (8). Torque bolts to 50-55 Ib-ft (68-75 N-m).

z. On models 5063-5392, 5063-5393, 5063-539F and 5063-539L, torque adjacent rocker arm shaft

bolts (8) to 50-55 Ib-ft (68-75 N-m).

aa. Slide control tube lever (14) into injector rack (16).

ab. On 1 R cylinder, for all except model 5063-5299, install U-bolt (6), two Iockwashers (5), and two nuts

(4) in throttle delay lever assembly (7).

CAUTION

Do not bend fuel tube assemblies and do not exceed specified torque on fuel tube nuts.

Excessive tightening will twist or fracture flared end of fuel tube and result in leaks.

ac. Install two fuel tubes (3). Using fuel nut wrench (27), torque four fuel tube nuts to 130-160 lb-in

(14.7-18.1 NŽm).

ad. Repeat steps a. thru ac. on remaining cylinders.

END OF TASK

FOLLOW-ON MAINTENANCE

Para

4-4.d

4-4.e

3-20

3-21

3-22

Description

Adjust injector control tubes.

Adjust throttle delay,

Install rocker arm covers (models 5063-5299 and 5063-5398).

Install rocker arm covers (models 5063-5392, 5063-5393, 5063-539F and 5063-539 L).

Install rocker arm covers (models 5063-5395).

Change 1

4-29