TM-9-2815-205-34

ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

AUGUST 1992

TM-9-2815-205-34 - Page 536 of 596

TM 9-2815-205-34

4-11. PREPARATION OF ENGINE FOR STORAGE

This task covers: a. Protection of Overhead Assemblies

b. Protection of Crankshaft

c. Draining Engine

d. Cleaning Engine

INITIAL SETUP

MODELS

MATERIALS/PARTS

All

1

Filter element, fluid (App F, Item 22)

(model 5063-5393)

TOOLS AND SPECIAL TOOLS

Tool set, general mechanics (App B, Item 107)

EXPENDABLE/DURABLE SUPPLIES

Wrench, oil filter (App B, Item 114)

Masking tape (App C, Item 52)

Sling, beam-type (App B, Item 92 )

Cleaning solvent (App Cl Item 9)

a. Protection of Overhead Assemblies

(1)

(2)

(3)

(4)

(5)

(6)

(7)

On model 5063-5299, remove clamp (1)

and hose (2) from left rocker arm cover

(3). Remove hose and clamp.

On models 5063-5299, 5063-5395, and

5063-5398, remove four clamp and screw

assemblies (4) and rocker arm cover (3)

from each cylinder head.

On models 5063-5392, 5063-5393,

5063-539F and 5063-539L, remove two

bolts (5), two flat washers (6), two resilient

mounts (7), and rocker arm cover (3) from

each cylinder head.

Slowly pour one-half gallon of engine oil

over valves and valve train components of

both cylinder heads.

On models 5063-5299, 5063-5395, and

5063-5398, install rocker arm cover (3)

and four clamp and screw assemblies (4)

on cylinder head. Tighten clamp and

screw assemblies.

On models 5063-5392, 5063-5393,

5063-539F and 5063-539L, install rocker

arm cover (3), two resilient mounts (7), two

flat washers (6), and two bolts (5) on each

cylinder head.

On model 5063-5299, install hose (2) and

clamp (1) on rocker arm cover (3).

b. Protection of Crankshaft

(1) Remove oil filler cap (8).

4-52

Change 1