TM-9-2815-205-34

ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

AUGUST 1992

TM-9-2815-205-34 - Page 537 of 596

(2)

(3)

(4)

(5)

(6)

When possible, fill the crankcase with oil to a proximately 15

the oil gage rod tube. (Used oil can be used for this purpose).

Manually turn engine over at least one complete revolution.

Remove oil pan drain plug and drain oil.

Install oil pan drain plug.

Install oil filler cap (8).

c.

Draining

(1)

(2)

(3)

TM 9-2815-205-34

inches (38 cm) below the top of

Lift engine using a beam-type sling (9)

attached to lifting brackets (10). Use a

hoist with a minimum lifting capacity of 1.5

tons (1.36 metric tons).

NOTE

Model 5063-5398 has only two

drain cocks, one on each side

of engine.

Open two drain cocks (11) on right side of

cylinder block and one on left side and

drain engine coolant from cylinder block

into a suitable container.

NOTE

Models 5063-5392, 5063-

5393, and 5063-539L have a

plug instead of a drain cock.

Open drain cock (12) in bottom of cooler

(13) and drain coolant from oil cooler.

Change 1

4-53