TM-9-2815-205-34

ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

AUGUST 1992

TM-9-2815-205-34 - Page 540 of 596

TM 9-2815-205-34

4-11. PREPARATION OF ENGINE PRIOR TO REMOVAL OF ENGINE ACCESSARIES AND

INSTALLATION ON MAINTENANCE STAND (Cont)

●

Dry cleaning solvent P-D-680 is toxic and flammable. Wear protective goggles

and gloves and use in a well-ventilated area. Avoid contact with skin, eyes, and

clothes. Do not breathe vapors. Do not use near open flame or excessive heat.

The flash point is 100-138°F (38-50°C). If you become dizzy while using cleaning

solvent, get fresh air immediately and seek medical aid. If contact with eyes is

made, wash with water and get medical aid immediately.

●

Compressed air used for cleaning purposes will not exceed 30 PSI. Use only with

effective chip guarding and personal protective equipment (goggles/shield,

gloves, etc.)

(3) Remove oil and grease from exterior of engine using a stiff brush and cleaning solvent. Blow dry

with compressed air.

END OF TASK

FOLLOW-ON MAINTENANCE

Para Description

2-30 Install engine in container

2-31 Install engine in container

2-32 Install engine in container

(model 5063-5299).

(models 5063-5299,5063-5392, 5063-5393 and 5063-539L).

(models 5063-5395,5063-5398, and 5063-539F).

4-56

Change 1