TM-9-2815-210-34-2-1

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 1 OF 2

APRIL 1981

TM-9-2815-210-34-2-1 - Page 173 of 259

TM 9-2815-210-34-2-1

3-30. INTAKE AND EXHAUST MANIFOLDS.

Preliminary Procedure.

Remove cylinder head water outlet manifolds. Refer

to para 3-29.

b .

Removal.

NOTE

Intake manifold and exhaust manifold must be

taken off together as an assembly.

1.

Take out 12 nuts and washers (1) holding top flanges of intake manifold (2)

to cylinder heads (3).

2.

Take out six locknuts and washers (4) holding top flanges of exhaust manifold

(5) to cylinder heads (3).

IF WORKING ON ENGINES LDS-465-1 , LDS-465-1A , OR LDS-465-2, GO TO FRAME

FRAME 2.

IF WORKING ON ENGINES LD-465-1, LD-465-1C , OR LDT-465-1C , GO TO FRAME 3

3-125