TM-9-2815-210-34-2-1

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 1 OF 2

APRIL 1981

TM-9-2815-210-34-2-1 - Page 175 of 259

TM 9-2815-210-34-2-1

FRAME 3

1.

Take off four nuts and washers (1) holding bottom flanges of intake manifold

(2) to cylinder heads (3).

2.

Take off two nuts (4) and take off oil level gage support bracket (5).

WARNING

Intake manifold (2) and exhaust manifold (7) assembly is

heavy.

Hold it up firmly when taking off locknuts and

washers (6) or it may fall and cause injury to personnel.

3.

Take off six locknuts and washers (6) holding exhaust manifold (7) to

cylinder head (3).

4.

Take off intake manifold (2) and exhaust manifold (7) together as an

assembly.

5.

Take intake manifold (2) apart from exhaust manifold (7).

GO TO FRAME 4

TA 087679

3-127