TM-9-2815-210-34-2-1

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 1 OF 2

APRIL 1981

  TM-9-2815-210-34-2-1 - Page 181 of 259

TM 9-2815-210-34-2-1
FRAME 4
1.
Working on side of stand without crank handle, put three universal mounting
arms (1) in place on mounting plate (2). Put in three capscrews (3).
2.
Put three L-shaped brackets (4) in place on engine block (5). Put in three
capscrews (6).
3.
Tighten all capscrews.
4.
Lower chain hoist and take off lifting sling.
END OF TASK
TA 118085
3-133


Back to Top