TM-9-2815-210-34-2-1

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 1 OF 2

APRIL 1981

TM-9-2815-210-34-2-1 - Page 189 of 259

TM 9-2815-210-34-2-1

Soldier A

Soldier B

Soldiers

A and B

WARNING

pressure plate assembly (1) is heavy. It must be held

firmly up and against flywheel (2) when mounting screws

are taken out.

If it is not held up, it will fall and cause

injury to personnel.

Clutch disk (4) is heavy enough to cause injury if

dropped.

It is held in place by pressure plate assembly

( 1). Do not let it fall out and drop when pressure plate

assembly is taken out or it may cause injury to personnel.

NOTE

Clutch disk (4) may have been taken out before engine

was shipped.

1.

Hold pressure plate assembly (1) firmly up and against flywheel

(2) so it does not fall when soldier B takes out mounting screws

(3) .

2.

Take out eight screws and lockwashers (3).

3.

Take out pressure plate assembly (1) and clutch disk (4).

END OF TASK

TA 087686

3-141