TM-9-2815-210-34-2-1

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 1 OF 2

APRIL 1981

TM-9-2815-210-34-2-1 - Page 185 of 259

TM 9-2815-210-34-2-1

3-34. CYLINDER HEAD ASSEMBLIES.

FRAME 1

1.

Take out 11 nuts and washers (1) from front cylinder head assembly (2).

NOTE

Early model engines have a sleeve spacer instead of

washer (4) under each of three nuts (3).

2.

Take off three nuts (3) and three washers (4) from front cylinder head

assembly (2).

3.

Do steps 1 and 2 again for rear cylinder head assembly (5).

GO TO FRAME 2

TA 007683

3-137