TM-9-2815-210-34-2-1

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 1 OF 2

APRIL 1981

TM-9-2815-210-34-2-1 - Page 191 of 259

TM 9-2815-210-34-2-1

WARNING

Soldier A

Soldier B

Soldiers

A and B

Pressure plate assembly (1) is very heavy. It must be

held firmly up and against flywheel (2) when mounting

screws are taken out.

If it is not held up, it will fall

and cause injury.

Clutch disk (3) is heavy enough to cause injury if

dropped.

It is held in place by pressure plate assem-

bly (1).

Do not let it fail out and drop when pressure

plate assembly is taken off or it may cause injury to

personnel.

NOTE

Clutch disk (3) may have been taken out before engine

was shipped.

1.

Hold pressure plate assembly (1) firmly up and against flywheel

(2) so it does not fall when soldier B takes out mounting screws

(4) .

2.

Take out 12 screws and lockwashers (4).

3.

Take out pressure plate assembly (1) and take out clutch disk (3).

END OF TASK

TA 086363

3-143