TM-9-2815-210-34-2-1

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 1 OF 2

APRIL 1981

TM-9-2815-210-34-2-1 - Page 200 of 259

TM 9-2815-210-34-2-1

Soldier A 1.

Using engine barring tool, hold crankshaft damper and pulley (1)

so it cannot turn to the right.

Soldier B 2.

Hold flywheel (2) and flexible drive plates (3) against crankshaft

so they will not fall when lockbolts (4) are taken out. While

holding flywheel (2) and flexible drive plates (3) against crank-

shaft, take out five lockbolts (4).

3.

Take out transmission drive ring (5) and outer flexible drive

plate ( 3).

Soldier A 4.

Using tool tag and wire, tag outer flexible drive plate (3) with

the number 4 so it can be put back in the same place.

G0 TO FRAME 4

TA 087696

3-152