TM-9-2815-210-34-2-1

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 1 OF 2

APRIL 1981

TM-9-2815-210-34-2-1 - Page 204 of 259

TM 9-2815-210-34-2-1

3-37. FLYWHEEL HOUSING.

FRAME 1

NOTE

Flywheel housing (3) shown is for engine LDS-465-1A.

This task is the same for all other engines.

1.

Take off two nuts (1) and two 1/8-inch thick washers (2).

WARNING

Flywheel housing (3) is heavy. Be sure to hold it firmly

up and against engine when taking off mounting nuts (4).

It could fall off mounting studs (5) and cause injury to

personnel .

Soldier A 2 .

Hold flywheel housing (3) firmly against engine so it does not slip

off mounting studs (5) and fall.

Soldier B 3 .

Take off six nuts (4) and six 1/16-inch washers (6).

Soldiers 4 .

Take off flywheel housing and gasket (3). Throw away gasket.

A and B

END OF TASK

3-156