TM-9-2815-210-34-2-1

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 1 OF 2

APRIL 1981

  TM-9-2815-210-34-2-1 - Page 213 of 259

TM 9-2815-210-34-2-1
b .
Engines LDS-465-1, LD-465-1A, and LDS-465-2.
NOT E
Only the pressure oil pump outlet tube is
taken out before the oil pump is removed
from these engines.
1.
Cut and take out safetywire (1).
Take out two drilled-head bolts (2).
2.
Take out two screws and lockwashers (3).
3.
Take out pressure oil pump outlet tube (4), outlet tube flange (5), and
pressure oil pump outlet tube flange O-ring (6). Throw away O-ring.
4.
Take off outlet tube gasket (7) and throw it away.
END OF TASK
3-165


Back to Top