TM-9-2815-210-34-2-1

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 1 OF 2

APRIL 1981

TM-9-2815-210-34-2-1 - Page 237 of 259

TM 9-2815-210-34-2-1

FRAME 5

CAUTION

1.

2.

Be careful not to bend or scratch main bearing lower

halves (3) when taking them out.

NOTE

Main bearing caps (2, 4, 5, and 6) and main bearing

lower halves (3) are called by numbers one to seven

counting from front to rear of engine.

Take out two screws and washers (1) and take out number two main bearing

cap (2).

Take off number two main bearing lower half (3). Tag number two

main bearing lower half with the number 2.

Do step 1 again for number three main bearing cap (4), number five main

bearing cap (5), and number six main bearing cap (6).

GO TO FRAME 6

3-189