TM-9-2815-210-34-2-1
ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER
TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 1 OF 2
APRIL 1981
TM-9-2815-210-34-2-1 - Page 236 of 259
TM 9-2815-210-34-2-1
FRAME 4
1.
GO
CAUTION
Be careful not to bend or scratch main thrust bearing
lower half (3) when taking it out.
Main bearing caps and
called by numbers one
rear of engine.
The number four main
NOT E
main bearing lower halves are
to seven counting from front to
bearing cap (2) is called thrust
main bearing cap.
It is different-from other main bear-
ing caps (4) because it has a thrust shoulder (5).
The number four main bearing lower half (3) is called
thrust main bearing lower half. It is different from
other main bearing lower halves because it has flanges
(6) .
Take out two screws and washers (1) and take out thrust main bearing cap (2).
Take off thrust main bearing lower half (3).
TO FRAME 5
3-188
Back to Top
