TM-9-2815-210-34-2-1

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 1 OF 2

APRIL 1981

TM-9-2815-210-34-2-1 - Page 232 of 259

TM 9-2815-210-34-2-1

3-47. OIL PUMP IDLER GEAR ASSEMBLY.

FRAME 1

NOTE

Do not take off oil pump idler gear (3) if it is not dam-

aged.

If idler gear is not damaged, go to step 4.

1.

Take off retaining ring (1).

2.

Take off thrust washer (2).

3.

Take off idler gear and bearing (3). Press bearing out of idler gear.

CAUTION

Be careful not to bend or scratch main bearing lower

half (6) when taking it out.

4.

Take out two screws and washers (4) and take out front main bearing cap (5).

Take off front main bearing lower half (6).

5.

Tag front main bearing lower half (6) with the number 1.

END OF TASK

3-184