TM-9-2815-210-34-2-1

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 1 OF 2

APRIL 1981

  TM-9-2815-210-34-2-1 - Page 81 of 259

TM 9-2815-210-34-2-1
b .
Engines LDS-465-1, LDS-465-1A, and LDS-465-2.
NOTE
If working on engine LDS-465-1 or LDS-465-1A,
go to frame 2.
FRAME 1
1.
2.
3.
4.
NOTE
Tag hydraulic pump return hose (1) and hydraulic pump
bypass hose (2) so that they are put back in the same
place.
Loosen two hose clamps (3).
Place container under hydraulic pump return hose (1). Take off hydraulic
pump return hose and drain hydraulic oil into container.
Place container under hydraulic pump bypass hose (2). Take off hydraulic
pump bypass hose and drain hydraulic oil into container.
Empty container in approved disposal area.
GO TO FRAME 2
3-33


Back to Top