TM-9-2815-210-34-2-1

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 1 OF 2

APRIL 1981

  TM-9-2815-210-34-2-1 - Page 89 of 259

TM 9-2815-210-34-2-1
3-11. OIL FILTER ELEMENTS.
FRAME 1
1.
Hold container under oil filter drain plug (1). Takeout drain plug, and
drain oil
2.
Unscrew
3.
Take out
4.
Take out
5.
Do steps
END OF TASK
out of oil filter housing (2). Put back drain plug (1).
NOTE
There is a spring and spring retainer cup inside oil
filter bodies ( 3 and 4).
Be careful they are not lost
when filter bodies are taken off.
center post (5).
Lift out filter body (3) with center post.
and throw away filter element (6).
and throw away filter body gasket (7).
2 through 4 again for front oil filter body (4).
3-41


Back to Top