TM-9-2815-210-34-2-1
ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER
TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 1 OF 2
APRIL 1981
TM-9-2815-210-34-2-1 - Page 95 of 259
TM 9-2815-210-34-2-1
3-14. FUEL FILTER ASSEMBLY, FUEL TUBES, AND OIL HOSE.
Preliminary Procedure. Remove fuel injection pump assembly. Refer to
para 3-10.
b .
Engines LD-465-1, LD-465-1C, and LDT-465-1C.
FRAME 1
1.
2.
3.
4.
NOTE
Tag all tubes so that they will be put back in the same
place.
This task is shown for engines LD-465-1C and
LDT-465-1C.
This task is the same for engine
LD-465-1.
Unscrew two coupling nuts (1). Take off fuel return tube (2). Take off
fuel filter inlet tube (3).
Unscrew coupling nut (4).
Take off fuel filter-t o-fuel density compensator
tube (5).
Take off three nuts and lockwashers (6) and take off fuel filter assembly (7).
Spread open two clamps (8) and take off two drain tubes (9).
GO TO FRAME 2
3-47
Back to Top
