TM-9-2815-210-34-2-1
ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER
TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 1 OF 2
APRIL 1981
TM-9-2815-210-34-2-1 - Page 90 of 259
TM 9-2815-210-34-2-1
3-12. AIR COMPRESSOR ASSEMBLY,
a.
All Engines Except LDS-465-2.
FRAME 1
1.
2.
3.
4.
5.
6.
Takeout two screws and lockwashers (1).
Place air compressor pulley adjusting wrench (2) over air compressor pulley
flange (3) as shown.
Turn pulley adjusting wrench (2) to left.
Take off and tag air compressor
drive belt (4).
Turn pulley flange (3) to the right and put in two screws and lockwashers
(1) so they are not lost.
Take out screw (5) and take off clip (6) with fuel return tube (7). Put back
screw (5).
Take off four nuts (8) and lockwashers (9) and lift off air compressor (10).
Take off and throw away air compressor gasket (11).
END OF TASK
3-42
Back to Top
