TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 432 of 968

TM 9-2815-210-34-2-2

(2) Shim type nozzle and valve holder.

NOTE

Work area must be kept clean.

FRAME 1

1.

2.

3.

CAUTION

Do not touch valve (1) with hands. Oil may rub off

causing a sticking valve which can damage equipment.

Do not let polished surface of valve or valve body (2)

touch any hard surfaces. Nicks or scratches can

damage equipment.

Hold valve (1) with pliers, as shown, and push into valve body (2).

Put valve (1) with valve body (2) into nozzle holder (3). Put nozzle holder

into soft-jawed vise as shown.

Put on and tighten nozzle capnut (4) to 40 to 45 pound-feet.

GO TO FRAME 2

4-413