TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 436 of 968

TM 9-2815-210-34-2-2

FRAME 2

1.

2.

3.

4.

WARNING

Face shields and gloves must be worn when using

heated cleaning compound. Work only in well-

ventilated area. Do not breathe in steam. Failure

to use proper precautions may result in injury to

personnel.

Mix cleaning compound in metal container (1). Put agitator (2) in container

and put in thermostat housing (3).

NOTE

Set air supply at about 5 psi. Use hot plate or

other suitable heating element to boil cleaning com-

pound.

Place container (1) on hot plate and hook up air supply to agitator (2).

Turn on heat and when cleaning compound starts to boil, turn on air supply.

Allow thermostat housing (3) to boil for about 30 minutes.

Turn off air supply. Turn off heat.

Rinse housing (3) in hot water.

END OF TASK

4-417