TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

  TM-9-2815-210-34-2-2 - Page 429 of 968

TM 9-2815-210-34-2-2
FRAME 2
1.
2.
NOTE
If working on adjusting screw-type fuel injector nozzle
and holder assembly, do step 1.
If working on shim-type fuel injector nozzle and holder
assembly, do step 2.
Check that threads of cap (1), locknut (2), and adjusting screw (3) have no
damage.
Fix threads which have minor damage with a tap and chaser. If
damage cannot be fixed, get new cap, locknut or screw.
Check that threads of cap (4) are not damaged. Fix threads which have minor
damage with a tap and chaser.
If damage cannot be fixed, get new cap.
END OF TASK
4-410


Back to Top